波胆预测网

VGH-howardzweig plate heat exchanger-Jiangyin Weigehao Heat Exchange Equipment Co., Ltd. (Howard Zweig) Welcome!
    contact details

      Address: Xuxiake Town, Jiangyin, Jiangsu

      Phone: 0510-86573881

      Email: 807922178@qq.com

      Website: http://edigitex.com

    Advantages of plate heat exchangers

    2019-6-5 18:05:34 Click:

    Advantages of plate heat exchangers

    • Easy to disassemble and clean

      All you need to do is remove the captive bolts and slide the movable frame back. Then, if necessary, the board assembly can be inspected, pressure cleaned or removed for refurbishment.
    • Extension

      A significant advantage of the plate heat exchanger is that it is expandable and can increase heat transfer capacity. As your heat transfer requirements change, you can save time and money by adding plates instead of buying new frame units.
    • high efficiency

      The pressed plate pattern and narrow gap allow very high turbulence at relatively low fluid velocities. In combination with reverse flow, a very high heat transfer coefficient is produced.
    • The compact size and high efficiency require less heat transfer area, resulting in a heat exchanger that is much smaller than the same efficiency of other heat exchanger types. Generally, plate heat exchangers require 20-40% less space than shell and tube heat exchangers.
    • Close to temperature

      The same characteristics that make plate heat exchangers highly efficient also make it possible to reach close approach temperatures, which is especially important in heat recovery and regeneration applications. The approach temperature can reach 1ºF.
    • Multiple responsibilities for a single unit

      Plate heat exchangers can be constructed in sections, separated by simple divider plates or more complex divider frames with additional connections. This makes it possible to heat, regenerate and cool fluids in one heat exchanger, or to heat or cool multiple fluids with the same cooling or heating source.
    • Avoid cross-contamination

      Each medium is individually filled and cross-contamination of the fluid is eliminated when the space between the gaskets is discharged into the atmosphere.
    • Reduce pollution

      Due to the pattern of the plates, many contact points and the narrow gaps between the plates, very high turbulence is achieved. Compared to other types of heat exchangers, this combined with a smooth plate surface can significantly reduce fouling.
    • lower the cost

      A high heat transfer coefficient means a smaller heat transfer area and a smaller heat exchanger, and sometimes even fewer heat exchangers. This and less space requirements mean lower flow rates and smaller pumps.

    Copyright 2019 edigitex.com

    Howarzweig Plate Heat Exchanger Howardzweig All Rights Reserved

    Website Recording : 苏 ICP 备 18025076 号 -1

    15335215915